so after a long time and several other projects later i finally got around to working on this one again..
so far the engine 2L engine that i slapped in was way to heavy for the car and ended up dropping the suspension so bad at the back with the 18" that the wheels caught on the inner fenders... so after adjusting the suspension (raising it) I pulled it out again and slapped in a 1600Tp engine.. and lucky me had to chop the car in the back for clearance, but decided to make an air scoop, or even a cover, this can be covered by the fold up roof, so no real worries there...
next up was fitting the dash (had to be extended due to the PO cutting the inner coving shell to pieces..(windscreen to dash section)
after the fiment of the steering column I couldnt find a boss kit for the steering wheel, and ended up buying a Bay window steering column and fitting this..
the lights (911/964 items was next to follow, the car was moulded for the older type tail lights and these had to be modded to get them to fit.
then the rear bumper turned out to be too short, and had to be extended (still in progress)
master cylinder is in place, and the brakes fitted (wheel hubs were bare inside) but after bleeding, no pressure? will have another look at this..
ok so all the wires brand new, running engine, brakes in progress, seats in dash in, wow at least the list is getting shorter..
I am still after 911 headlights, as these look funny..
but unfortunately in SA spares is very scarce.....
anyway pics as below, cool