COVIN OWNERS CLUB FORUM
http://www.covin.co.uk/covinforum/

gearbox
http://www.covin.co.uk/covinforum/viewtopic.php?f=22&t=3731
Page 1 of 1

Author:  italian job andy [ Tue Jan 21, 2014 9:11 pm ]
Post subject:  gearbox

Hello,
I will be selling my gearbox as I now have a type 3 box to go with my type 4 engine.
The gearbox is an IRS with ford input shaft plus has the adapter plate.
If you need photo's I can take some.
Make me a sensible offer and it is yours or it is going on eBay
Thanks
Andy

Author:  italian job andy [ Wed Jan 22, 2014 10:58 pm ]
Post subject:  Re: gearbox

ImageImageImageImage

this is the gearbox, with adapter and correct input shaft for ford cvh engine, but have been told other ford engines may fit it.
The only thing that will not be included is the gearbox rubber support which you can easily get from ebay fairly cheaply ( front mount )
Anyway like I said it is up for grabs make me a sensible offer and I will see what we can do.
Otherwise I will ebay it and let others have a chance.
Thanks
Andy

Author:  maph2 [ Fri Jan 24, 2014 10:27 am ]
Post subject:  Re: gearbox

hmmm - i'm certainly interested - does this adaptor fully seal the gap between the gearbox and the ford engine. mine has lots of gaps and the flywheel is well exposed at the bottom. problem is i have a swing axle

Author:  italian job andy [ Sat Jan 25, 2014 11:50 am ]
Post subject:  Re: gearbox

I have no idea as i bought it with no engine fitted.
Not very helpfull i know

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/